Kramer WP-27, Руководство пользователя, Страница: 11 / 16

Connecting the WP-27 / WP-28
9
5 Connecting the WP-27 / WP-28
When configuring the
WP-27
/
WP-28
CAT5 Transmitter and Receiver system,
you can choose to transmit one of the three video signals to the receiver: a
component video signal, or a composite video signal or an
s-Video signal. You can connect either a composite video source or an
s-Video signal, as well as a component video signal and use the video input
selector button to choose the desired signal to transmit to the receiver.
In the example illustrated in Figure 5, the
WP-27
/
WP-28
CAT5 Transmitter
and Receiver system is set up to transmit a component video signal (for
example, for high quality home cinema).
To connect the Transmitter and Receiver system, as shown in the example
illustrated in Figure 5, do the following
1
:
1. On the
WP-27
, connect a:
Component video source (for example, a component video player), to
the Y, C
B
/P
B
, and C
R
/P
R
RCA VIDEO INPUT connectors
A digital audio source
2
(for example, the audio signal of the component
video player), to the S/PDIF AUDIO INPUT RCA connector
2. On the WP-27 , press
3
the VIDEO INPUT selector button and release
4
the
AUDIO INPUT selector button.
3. On the WP-28 , connect the:
Y, C
B
/P
B
, and C
R
/P
R
RCA VIDEO INPUT connectors to a component
video aceptor (for example, a plasma display)
S/PDIF AUDIO INPUT RCA connector to a digital audio acceptor (for
example, a receiver and speakers)
4. On the
WP-28
, press
5
the VIDEO OUTPUT selector button.
5. Connect the CAT5 OUT connector of the
WP-27
to the CAT5 IN
connector of the
WP-28
, via UTP cabling (maximum range of up to 300ft
(100m)).
6. On both
6
the
WP-27
and the
WP-28
, connect the 12V DC power adapter
to the power socket and connect the adapter to the mains electricity (not
shown in Figure 5).
1 You can transmit one of three video signals to the receiver: a component video signal, a composite video signal or an s-
Video signal. The receiver outputs this signal only
2 Alternatively, you can also connect an analog audio signal and select it via the AUDIO INPUT selector button
3 Thus selecting the component video input
4 Thus selecting the digital audio input
5 Thus selecting the component video output
6 If you cannot connect the power to both the WP-27 and WP-28, you can just connect the power to the WP-28