Kramer WP-210E, Руководство пользователя

Страница: 9 / 14

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the WP-210E XGA Line Driver
6
5 Using the WP-210E XGA Line Driver
You can use your
WP-210E
XGA Line Driver , for example, in a conference
room, as the example in Figure 5 illustrates:
Figure 5: Example of Conference Room WP-210E Installation
For details of how to:
Install your
WP-210E
XGA Line Driver , see section 5.1
Operate your WP-210E XGA Line Driver , see section 5.2
5.1 Installing the WP-210E XGA Line Driver
To install your
WP-210E
XGA Line Driver :
1. Connect the 5 BNC output connectors to the pre-installed wiring in the wall
box opening that connects to the XGA acceptor (for example, a projector).
2. Set both the Hs and Vs switches.
3. Connect your 12V DC power supply to the
POWER SUPPLY pins
1
,
taking care that
polarity is correct
.
4. Insert the
WP-210E
directly into the wall box opening, and then mount
the front panel securely using the screws.
1 Connect the wire labeled “+” to the +12V pin, and the wire labeled “–” to the GND pin