Kramer WP-210AE, Руководство пользователя

Страница: 8 / 14

Your WP-210AE XGA/Audio Line Driver
5
4.3 Your WP-210AE Top Side Panel
Figure 3 and Table 2 define the top side panel of the
WP-210AE
:
Table 2: WP-210AE Top Side Panel
# Feature Function
1 Bal. Audio Out
Terminal Block
Connector
Connects to the
balanced stereo audio
acceptor
Figure 3: WP-210AE Top Side Panel
4.4 Your WP-210AE Lower Side Panel
Figure 4 and Table 3 define the lower side panel of the
WP-210AE
:
Table 3: WP-210AE Lower Side Panel
# Feature Function
1 H (Horizontal)
Sync Switch
2 V (Vertical)
Sync Switch
Set both switches to TTL
for a digital sync source
(for example, a graphics
card from a PC or
laptop). Set both
switches to Analog if the
source is analog based,
for example, an RGBHV
source with coaxial cable
for sync, such as a
camera with analog H
and V syncs
3 +12V PIN Connect (+) to the
connector for powering
the unit
4 GND PIN Connect (-) to the Ground
Figure 4: WP-210AE Lower Side Panel
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the appropriate audio output level