KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your WP-210A XGA/Audio Line Driver
2
An amplified and equalized RGBHV output on 5 BNC connectors
An unbalanced stereo audio input on a 3.5mm mini jack
A balanced stereo audio output on a terminal block connector
In particular, the
WP-210A
XGA/Audio Line Driver
has:
Level
1
control
Cable equalization control
Left and right audio level controls
Buttons for ID Bit control and loop termination
Switches to select between analog / digital sync operation
Resolution exceeding UXGA, that ensures transparent operation
A standard 12 Volt DC feed
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances
Positioning your
WP-210A
away from moisture, excessive sunlight and dust
4 Your WP-210A XGA/Audio Line Driver
This section defines the
WP-210A
XGA/Audio Line Driver
:
Front panel (see section 4.1)
Left panel (see section 4.2)
Right panel (see section 4.3)
1 VGA/UXGA output signal
