Kramer Electronics Ltd.
VS-88H2A
– Using Embedded Web Pages
38
Changing Device Settings and Upgrading Firmware
The Device Settings Web page shows the device details, such as name, MAC address and
firmware version and also enables performing the following functions:
▪
Changing the Ethernet Settings
▪
▪
Changing the Ethernet Settings
To change the Ethernet settings:
1. In the Navigation pane, click
Device Settings
. The Device Settings page appears:
Figure 24: Device Settings Page
2. Uncheck/check the
DHCP
check box.
3. If DHCP is unchecked, change any of the parameters (IP Address, Netmask and/or
Gateway).
4. Click
Save Changes
.
Note that:
•
After changing the IP number, reload the Web page with the new IP address.
•
After changing the Subnet mask you need to turn the
VS-88H2A
power off and then
on again.
•
If DHCP is checked, reload the Web page with the new IP address.
Ethernet settings are changed.