Kramer Electronics Ltd.
VS-88DT
– Getting Started
2
Getting Started
We recommend that you:
•
Unpack the equipment carefully and save the original box and packaging materials for
possible future shipment
•
Review the contents of this user manual
Go to
www.kramerav.com/downloads/VS-88DT
to check for up-to-date user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
Achieving the Best Performance
To achieve the best performance:
•
Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables)
•
Do not secure the cables in tight bundles or roll the slack into tight coils
•
Avoid interference from neighboring electrical appliances that may adversely influence
signal quality
•
Position your Kramer
VS-88DT
away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Warning:
Do not open the unit. High voltages can cause electrical shock! Servicing by
qualified personnel only.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
Using TP cables
Kramer engineers have developed a special twisted pair cable to best match our HDBaseT
products, the Kramer
BC−HDKat6a
(CAT 6 23 AWG) cable. This specially built cable
significantly outperforms regular CAT 5/CAT 6/CAT 7a cables.