Kramer VS-62HA, Руководство пользователя

Страница: 71 / 95

66 VS-62HA - Protocol 3000 Commands
15.5 Audio Commands
These commands are used by audio devices running Protocol 3000.
Command Description Type Permission
AUD-LVL Set/Get audio level in specific amplifier stage Audio End user
AUD-SIGNAL? Get audio input signal status Audio End user
MUTE Set/get audio mute Audio End User
Command - AUD-SIGNAL
Command Type - Audio
Command Name Permission Transparency
Set: - - -
Get
AUD-SIGNAL?
End User Public
Description Syntax
Set: - -
Get: Get audio input signal status
# AUD-SIGNAL?
␠
inp_id
␍
Response
~ nn@ AUD-SIGNAL
␠
inp_id, status
␍␊
Parameters
Inp_id - input number (1 .. max input number)
status - 0 - OFF (no signal)
1 - ON (signal present
Response Triggers
After execution, response is sent to the com port from which the Get was received
Response is sent to all com ports if audio status state was changed on any input
Notes