Kramer VS-622DT, Руководство пользователя

Страница: 44 / 91

Kramer Electronics Ltd.
VS-622DT
– Managing IO Gateway Settings
42
Setting GPI/O Parameters
Use the GPIO setting tab to configure the following GPI/O ports:
▪
Configuring the Digital Input Trigger Type on page 42 .
▪
Configuring the Digital Output Trigger Type on page 44 .
▪
Configuring the Analog Input Trigger Type on page 45 .
GPI/O ports can be incorporated into automation only when they are set as inputs (see
Configuring Room Automation on page 48 ).
Configuring the Digital Input Trigger Type
Digital Input trigger mode reads the digital input of an external sensor device that is connected
to the GPIO port and can detect a:
•
High state voltage
– when the connected sensor passes the maximum threshold from the
low state.
•
Low State voltage
– when the connected sensor passes the minimum threshold from the
high state.
The minimum and maximum threshold levels are defined in the GPIO web page.
To configure the digital input trigger type:
1. In the Navigation pane, click IO Gateway . The IO Gateway page appears (see Figure
41 ).
2. Click GPIO . The GPIO tab appears.
Figure 43: IO Gateway Page
– GPIO Tab