KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-48HDxl
22
7.2.1 Toggling between the AT ONCE and CONFIRM Modes
To toggle between the AT ONCE and CONFIRM modes, do the following:
1. Press the dim TAKE button to toggle from the AT ONCE mode (in which the
TAKE button is dim) to the CONFIRM mode (in which the TAKE button
illuminates).
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the CONFIRM mode back
to the AT ONCE mode.
Actions no longer require user confirmation and the TAKE button no longer
illuminates.
7.2.2 Confirming a Switching Action
To confirm a switching action (in CONFIRM mode where the TAKE button is
illuminated), do the following:
1. Press an
OUT-IN combination.
The 7-segment
Display blinks
1
.
2. Press the TAKE button to confirm the action.
The 7-segment
Display no longer blinks. The TAKE button turns off.
7.3 Storing/Recalling Input/Output Configurations
You can store and recall up to twelve setup configurations, as well as the
working mode, using the four INPUT buttons and the eight OUTPUT buttons.
7.3.1 Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Set the working mode, see section 6.2.
2. Press the STO button.
The STO button illuminates.
3. Press one of the 12 INPUT / OUTPUT buttons (this will be the setup # in
which the current configuration is stored).
The selected INPUT / OUTPUT button illuminates in blue. The memory
stores the data at that reference.
To confirm the setup, press the INPUT/OUTPUT button again.
To cancel the setup, press the STO button once again
1 The timeout lasts for 10 seconds
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203