Your VS-44H 4 x 4 HDMI Matrix Switcher
7
7
Table 1: VS-44H 4 x 4 HDMI Matrix Switcher Features
#
Feature
Function
1
IR Receiver LED
The red LED is illuminated when receiving signals from the Infra-red
remote control transmitter
2
POWER
Switch
Illuminated switch for turning the unit ON or OFF
3
ALL
Button
Use ALL to select all inputs or all outputs (see section
7.1
)
4
OFF
Button
Use OFF to disconnect one or all outputs (see section
7.2
)
5
IN
Buttons
Press an INPUT selector button to select an input (from 1 to 4)
6
OUT
Buttons
Press an OUTPUT selector button to select an output (from 1 to 4)
7
STO
Button
Press to store an input setting
8
RCL
Button
Press to recall an input setting
9
LOCK
Button
Press to toggle disengaging the front panel buttons and to acquire
the EDID (see section
7.4
)
10
EDID
Button
1
Press to acquire the EDID
11
7-segment Display
Displays the selected input switched to the output (marked above
each input)
12
IN
HDMI Connectors
Connect to the HDMI sources (from 1 to 4)
13
OUT
HDMI Connectors
Connect to the HDMI acceptors (from 1 to 4)
14
RS-232
9-pin D-sub Port
Connects to the PC or the RS-232 Remote Controller
15
ETHERNET
Connector
Connects to the PC or other Ethernet Controller
16
RESET
Button
Press the reset button to reset to the ETHERNET factory default
definitions
2
IP number
−
192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
:
17
REMOTE IR
Connector
Connect to an external IR receiver unit for controlling the machine
via an IR remote controller (instead of using the front panel IR
receiver)
18
Power Connector with Fuse AC connector enabling power supply to the unit
1 Illuminates when configuring the EDID
2 First disconnect the power cord and then connect it again while pressing the RESET button. The unit will power up and load
its memory with the factory default definitions
