Kramer VS-44DT, Руководство пользователя, Страница: 19 / 71

12 VS-44DT - Connecting the VS-44DT
5.3 Connecting to the VS-44DT via Ethernet
You can connect to the VS-44DT via Ethernet using either of the following methods:

Directly to the PC using a crossover or straight cable (see Section
5.3.1
)

Via a network hub, switch, or router, using a straight-through cable (see
Section
5.3.2
)
Note : If you want to connect via a router and your IT system is based on IPv6,
speak to your IT department for specific installation instructions.
5.3.1 Connecting the Ethernet Port Directly to a PC
You can connect the Ethernet port of the VS-44DT directly to the Ethernet port on
your PC using a crossover or straight cable with RJ-45 connectors.
This type of connection is recommended for identifying the VS-44DT
with the factory configured default IP address.
After connecting the VS-44DT to the Ethernet port, configure your PC as follows:
1. Click Start > Control Panel > Network and Sharing Center .
2. Click Change Adapter Settings .
3. Highlight the network adapter you want to use to connect to the device and
click Change settings of this connection .
The Local Area Connection Properties window for the selected network
adapter appears as shown in Figure 4 .