![Kramer VS-42UHD Скачать руководство пользователя страница 45](http://html.mh-extra.com/html/kramer/vs-42uhd/vs-42uhd_user-manual_2001343045.webp)
40
VS-42UHD - Protocol 3000
•
K-Config (Kramer configuration software):
All the examples provided in this section are based on using the
K-Config software.
You can enter commands directly using terminal communication software (e.g.,
Hercules) by connecting a PC to the serial or Ethernet port on the
VS-42UHD
. To
enter
CR
press the Enter key (
LF
is also sent but is ignored by the command
parser).
Commands sent from various non-Kramer controllers (e.g., Crestron) may require
special coding for some characters (such as,
/X##
). For more information, refer to
your controller’s documentation.
For more information about:
•
Understanding Protocol 3000, see
Section 13.1
•
General syntax used for Protocol 3000 commands, see
Section 13.2
•
Protocol 3000 commands available for the
VS-42UHD
, see
Section 13.3
13.1 Understanding Protocol 3000
Protocol 3000 commands are structured according to the following:
•
Command –
A sequence of ASCII letters (
A-Z
,
a-z
and
-
). A command and
its parameters must be separated by at least one space.
•
Parameters –
A sequence of alphanumeric ASCII characters (
0-9
,
A-Z
,
a-z
and some special characters for specific commands). Parameters are
separated by commas.
•
Message string –
Every command entered as part of a message string
begins with a message starting character and ends with a message closing
character.
Содержание VS-42UHD
Страница 1: ...USER MANUAL MODEL VS 42UHD 4x2 HDMI Matrix Switcher P N 2900 300609 Rev 1 www kramerAV com ...
Страница 2: ......
Страница 3: ......
Страница 70: ......