Kramer VS-42UHD, Руководство пользователя

Страница: 20 / 71

VS-42UHD - Principles of Operation 15
5.3 EDID Operation
The VS-42UHD has a default EDID (see Section 12 ) stored on all inputs. This EDID
can be exchanged for either:
•
A custom EDID which is uploaded to one or more inputs using Protocol 3000
commands (see Section 13.3.5 )
–OR–
•
The EDID of a display device connected to an output by using either the
front panel buttons (see Section 6.2 ), a Protocol 3000 command, or the Web
pages
The EDID is non-volatile and the last valid EDID is used when the device is
powered up.
5.4 Step-in Functionality
The VS-42UHD can function as a step-in switcher when connected to a suitable
HDMI transmitter, (for example, the SID-X3N, DIP-30 or DIP-31 ) using the correct
HDMI cable with HEC support.
Use the Web pages (see Section 8.2.2 ) to assign remote device button actions.
The default button actions are shown in the following table. Up to three buttons can
be active at the same time.
Command Action
Echo Allows a connected controller to be programmed to perform a variety of
tasks triggered by the user buttons, such as, room control, (lights,
screen, and so on)
Out1 Step in current input to Output 1
Out2 Step in current input to Output 2