Controlling the VS-42HC
19
7.4.1
Setting a Virtual Port
If the control application cannot work with an Ethernet driver, use the Kramer
Virtual port driver as follows:
1. Run the Virtual Serial Port Manager Application.
The Virtual Serial Port Manager window appears (see Figure 12).
Figure 12: The Virtual Serial Port Manager Window
2. Press the
Add VSP
button to add a serial port and type the IP settings
according to the IP address and local port of your
VS-42HC
(see Figure 13).
Figure 13: The Virtual Serial Port Properties Window
3. You can set a virtual port for each local port on your
VS-42HC
(see Figure
14).