Operating Your Matrix Switcher
KRAMER ELECTRONICS, LTD.
10
Table 3: Storing and Recalling Setups
SLAVE to MASTER connection: Appears as follows:
Stored as Setup:
Switch SLAVE # 1 to MASTER # 4
Switch SLAVE # 2 to MASTER # 6
04 06
# 1
Switch SLAVE # 1 to MASTER # 9
Switch SLAVE # 2 to MASTER # 3
09 03
# 2
Switch SLAVE # 1 to MASTER # 6
Switch SLAVE # 2 to MASTER # 8
06 08
# 3
5.3.5.1 Storing Setup
To store a setup, do the following:
1. Press the MENU button 6 times.
The
Store SETUP
screen appears.
2. Press the Slave # button, where the Slave # represents the setup number.
3. Press the ENTER button.
This stores that setup.
5.3.5.2 Recalling Setup
To recall a setup, do the following:
1. Press the MENU button 5 times.
The
Recall SETUP
screen appears.
2. Press the Slave # button, where the Slave # represents the setup number.
This displays that specific setup
1
.
3. Press the ENTER button.
This recalls the specific setup.
Note that:
Saving a setup to an already allocated setup #, replaces that previous setup
5.3.6
System Setup Categories
To setup the system:
1. Press the MENU button 7 times.
The
Exit ->MENU SETUP->ENTER
screen appears.
2. Press the ENTER button.
The first in the sequence of 4 screens,
Keyboard action
, appears.
3. Continue to press the MENU button, as required, until you access the
required system setup category. Follow the instructions in Table 4:
1 Pressing another Slave # button before pressing ENTER, will display that other setup, allowing you to scan the setups
