KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-41HDMI
12
4. Toggle between the PC mode (input button not illuminated) and the DVD
mode (input button illuminated) by pressing that input.
5. Press the PANEL LOCK button to exit this mode.
6. You can connect a computer to the input(s) that is set to the PC mode and a
DVD to the input(s) that is set to the DVD mode.
Table 4 summarizes the differences between the PC mode and the DVD
mode:
Table 4: DVD Mode and PC Mode Characteristics
PC Mode
DVD Mode
The input is connected to a computer
The input is connected to a multimedia application,
such as a DVD, a set top box and so on
The EDID is available at all times (to prevent
computer reset)
The EDID is available only when that input is
connected to an output
The input EDID source is the default EDID
or an acquired EDID (see section 7.2)
The input EDID source is acquired directly from the
connected output
7.2 Setting the EDID
You can acquire or change the EDID (see section 7.2.1) or reset the machine
to the default EDID (see section 7.2.2).
7.2.1
Acquiring / Changing the EDID
You can work with the default EDID or acquire or change an EDID via the
connected output. Use the EDID button to acquire the output EDID
information.
To acquire or change the EDID of a new output display:
1. Connect the power supply.
2. Connect the new output display device.
3. Press the EDID button.
The INPUT buttons blink in sequence until the EDID is acquired.
7.2.2
Resetting the Default EDID
To reset the default EDID, disconnect the output and repeat the steps in
section 7.2.1.
