24
VS-3232DN - Operating Your Video Matrix Switcher
The TAKE button is no longer lit and actions no longer require user
confirmation.
6.3.2
Confirming a Switching Action
Actions only require confirmation when the device is in the Confirm mode.
To confirm a switching action:
1. Using the numeric keypad, enter an output-input combination.
The TAKE button flashes.
2. Press the flashing TAKE button to confirm the action.
The action is confirmed and the TAKE button lights.
6.4
Switching Actions
This section describes how to:
•
Switch one input to one output (see
Section 6.4.1
•
Switch several inputs to several outputs (see
Section 6.4.2
•
Turn off several outputs (see
Section 6.4.3
6.4.1
Switching one Input to one Output
To switch one input to one output:
1. Using the numeric keypad, enter the required output (in this example, 12).
The following is displayed:
06
07
08
09
10
11
12
13
In__ => Out 12
The left-hand side of the display shows a section of the output/input display
automatically sliding the content to include output 12.
2. Using the numeric keypad, enter the required input (in this example, 14):
•
In the At Once mode, the switching takes place immediately and the LCD
