Connecting the VS-21B
3
5 Connecting the VS-21B
To connect your
VS-21B
, as a 2x1 component video switcher
1
, as illustrated
in the example in Figure 2, do the following
2
:
1. Connect a component video source (for example, a set top box source) to
the INPUT 1 channels, as follows:
Connect the Y component video channel to BNC connector A
Connect the B-Y component video channel to RCA connector B
Connect the R-Y component video channel to RCA connector C
2. Connect a component video source (for example, a Betacam video
player) to the INPUT 2 channels, as follows:
Connect the Y component video channel to BNC connector A
Connect the B-Y component video channel to RCA connector B
Connect the R-Y component video channel to RCA connector C
3. Connect the OUTPUT channels to a component video acceptor (for
example, a plasma display), as follows:
Connect BNC connector A to the Y component video channel
Connect RCA connector B to the B-Y component video channel
Connect RCA connector C to the R-Y component video channel
4. Push in the front panel INPUT SELECTOR switch to route input 2, or
release it to route input 1.
1 Alternatively, you can connect your VS-21B as a switcher for composite video and unbalanced stereo audio (not illustrated
in Figure 2). In this case, connect the composite video channel to the BNC connector A, and the left and right audio channels
to the RCA connectors B and C, respectively
2 Switch OFF the power on each device before connecting it to your VS-21B. After connecting your VS-21B, switch on the
power on each device
