VS-211HA - Operating the VS-211HA
9
To set Automatic/Priority mode:
Slide AUTO/MANUAL DIP 1 up to AUTO and LAST/PRIORITY DIP 2 down
to PRIORITY
In Automatic/Last mode, the last connected input is sent to the output
If Inputs 1 and 2 are active when the
VS-211HA
is powered on, Input 1 is
sent to the output (as the priority input)
If Input 2 is disconnected, Input 1 is still sent to the output
If Input 2 is reconnected, Input 2 is sent to the output
For example, a salesman connected to Input 1 displays a presentation on the AV system
of a boardroom. A second salesman arrives, connects to Input 2 and continues with
his/her presentation.
To set Automatic/Last Connected mode:
Slide AUTO/MANUAL DIP 1 up to AUTO and LAST/PRIORITY DIP 2 up to
LAST
5.3
Using the Override Mode
Override mode is used while the
VS-211HA
is in either Priority or Last connected
automatic mode. Pressing either of the contact closure switches:
Forces the chosen input, if it is active, to be sent to the output
If the forced signal is inactive for 10 seconds, the
VS-211HA
returns to auto
mode
If the forced signal is lost, the
VS-211HA
reverts to its selected mode
For example, a sales manager, connected to Input 1, displays a presentation on the AV
system of a boardroom. A salesman arrives and wants to connect to Input 2 without
interrupting the manager. They press the Input 1 contact closure switch to allow Input 2 to
connect without interrupting Input 1.
