Connecting a VS-161HDMI 16x1 HDMI Switcher
9
6 Connecting a VS-161HDMI 16x1 HDMI Switcher
To connect the
VS-161HDMI
16x1 HDMI Switcher
as illustrated in the
example in Figure 2, do the following
1
:
1. If required:
Set the appropriate INPUTS to the DVD/PC mode (see section 7.1)
Acquire the EDID (see section 7.2)
2. Connect
2
the HDMI sources as follows
3
:
A multimedia player to INPUT 1
A set top box to INPUT 2
A DVD player to INPUT 6
A DVD player to INPUT 16
3. Connect the OUTPUT HDMI connector to an HDMI acceptor (for example, a
plasma display).
4. If required, connect a PC and/or controller to the RS-232 port (see section 7.3)
and/or the ETHERNET port (see section 7.4).
5. Connect the power connector to the mains electricity.
Press an INPUT SELECTOR button (from 1 to 16) to choose which HDMI
input to route to the output
4
.
1 Switch OFF the power on each device before connecting it to your VS-161HDMI. After connecting your VS-161HDMI,
switch on its power and then switch on the power on each device
2 You can connect up to 16 HDMI sources
3 Alternatively, you can connect a PC to any of the inputs and set those inputs to the PC mode (see section 7.1)
4 The input button illuminates
