Connecting and Configuring the VP-8x8TP 8x8 UXGA/Audio Matrix Switcher
13
6.4.1.1 Connecting the Ethernet Port Directly to a PC
You can connect the Ethernet port of the machine to the Ethernet port on your PC,
via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory default
IP Address
After connecting the Ethernet port, configure your PC as follows:
of the
VP-8x8TP
during the initial configuration
1. Click
Start
>
Control Panel.
2. Double-click
Network Connections.
3. Right-click, and from the menu select
Properties
.
The
Local Area Connection Properties
window appears.
4. Select
Internet Protocol (TCP/IP)
(see
).
Figure 5: Local Area Connection Properties Window
5. Click the
Properties
button.
6. Select
Use the following IP address
, and fill in the details as shown in
1 The default IP address is 192 168 1 39
