Kramer VP-8x8AK, Руководство пользователя

Страница: 17 / 57

Using the VP-8x8AK
13 13
6.2 Connecting the Balanced/Unbalanced Stereo Audio Output
This section illustrates how to wire:
•
A balanced output connection, see Figure 4
•
An unbalanced audio output, see Figure 5
Figure 4: Connecting the Balanced Stereo Audio Output
Figure 5: Connecting an Unbalanced Output
6.3 Connecting a PC or Controller to the RS-232 Port
You can connect to the VP-8x8AK via an RS-232 connection using, for
example, a PC. Note that a null-modem adapter/connection is not required.
To connect to the VP-8x8AK via RS-232:
•
Connect the RS-232 9-pin D-sub rear panel port on the product unit via a
9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5
need to be connected) to the RS-232 9-pin D-sub port on your PC
6.4 Connecting a PC or Controller to the RS 485 Port
You can operate the VP-8x8AK via the RS-485 port from a distance of up to
1200m (3900ft) using any device equipped with an RS-485 port (for example,
a PC). For successful communication, you must set the RS-485 machine
number and bus termination.