©
KRAMER ELECTRONICS LTD.
Issue 1-16 May 30, 2017
47
6.3.7
Advanced Splicing
In this menu, you can define the total dimension of the LED wall with the wall width and height
settings.
The portion of the output to be displayed is defined by the Horizontal and Vertical offset settings. .
Wall Width : Total Wall width
Wall Height: Total Wall Height
Hor Offset : The horizontal position within the total wall space where the image will be place
Ver Offset : The vertical position within the total wall space where the image will be place
6.3.7.1
Advanced Splicing
–
2x1 Example
Figure 7: 2x1 Advanced LED Screen Splicing example
STEP
MENU ITEM TO MODIFY
Unit-1
Unit-2
1
Output>Display Type>Output Mode
2560x1600
2560x1600
2
Output>Display Type> Frame Rate
30Hz
30Hz
3
Output>Display Type>I/O Lock
Source
Source
4
LED Screen Size> Splicing Zoom
On
On
5
LED Screen Size> Splicing Width
2
2
6
LED Screen Size> H-Pos
1*
2
7
LED Screen Size> Right Edge
1760
880
8
LED Screen Size> Bottom Edge
1440
1440
10
LED Screen Size> Splicing
Advanced
Advanced
12
LED Screen Size> Advanced Splicing> Wall Width
2640
2640
13
LED Screen Size> Advanced Splicing> Hor. Offset
0*
1760
* Some steps are skipped, because the values are the same as the default settings after factory reset