Kramer VP-796, Руководство по эксплуатации, Страница: 15 / 61

14
©
KRAMER ELECTRONICS LTD. Issue 1-13 July 28, 2016
3.5 Product Specification
This section provides technical specification for all models. The following topics are discussed:
 Power Supply Requirements
 Input Specifications
 Output Specifications
 Supported Formats
 Communication Specifications
3.5.1 Power Supply Requirement
100V-264VAC 50/60Hz connected via a standard IEC connector located on the rear panel.
3.5.2 Input Specifications
3.5.2.1 Video Inputs
 Composite via BNC connector
 Signal formats Composite (CVBS)
 Standards NTSC, PAL, SECAM
 Composite (CVBS) input level 1V p-p nominal incl. sync
 Input Impedance 75 Ohms
3.5.2.2 Component Video Inputs
 Via DVI-U connector and appropriate adapter cable
 YPbPr (YUV), YPbPrS and RGsB component video, menu selectable.
 Signal formats 484i (480i) and 576i (SD), 480p, 576p (ED), 720p, 1080i at 50, 59.94 and 60Hz
and 1080p at 23.98, 24, 25, 29.97 and 30Hz.
 Please note this input does not support Computer SVGA signals which should be connected via
the Computer SVGA input, The SVGA input supports the separate H & V syncs.
3.5.2.3 3G-SDI Input
 Format: SD-SDI, HD-SDI and 3G-SDI YCbCr 4:2:2 serial digital component video
 Input impedance: 75 ohms.
 SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant, accepts 484i, 576i, 720, 1080i and
1080p single link formats at 270Mb, 1.485Gb or 2.97Gb rates.
3.5.2.4 Computer (SVGA) Inputs VESA formats
 Signal formats: DOS, VGA – WUXGA up to 165MHz pixel clock
 RGB video level: 0.7V - 1.0V
 RGB input impedance: 75 Ohms
 Sync format : Separate H & V sync at TTL/5V levels.
3.5.2.5 HDMI & DVI Inputs
 HDMI with or without HDCP, 36-bit video compatible.
 DVI-D input with or without HDCP
 Signal formats - video
 SD: 625i (576i) and 525i (480i) in double-rate formats;
 ED: 480p, 576p;