Kramer VP-774A, Руководство пользователя

Страница: 33 / 122

VP-774AMP - The OSD Menu 27
27
6.3 The Audio Menu
Figure 19: Audio Menu
Setting Function
Volume Set the input/output volume level [dB], see Figure 20 E . Set the:
Input Volume [ dB ]
– to adjust the audio input level
Output Volume [ dB ]
– to adjust the audio output level
The maximum output volume can be pre-limited via the Web pages (see
Section
9.6.2
). When setting the volume level, once the slider reaches the maximum
defined by the pre-
limiter, a “Volume is pre-limited” message appears on screen.
The output audio level can also be set via the + and
– buttons on the front panel
buttons (when not in the OSD mode) and/or the IR remote control transmitter buttons
(see
Section
8.4
)
Note that when set to MUTE (see Section
6.8
), changing the output level
unmutes the audio signal.
Mic1 Volume [ dB ]
– to adjust the Microphone 1 audio level
Mic2 Volume [ dB ]
– to adjust the Microphone 2 audio level
Balance
Set the balance [ratio] E
Treble Set the treble [dB] E
Bass Set the bass level [dB] E
Mic Effects For Mic 1, set the:
Mic1 Talkover Depth [ % ]
– to determine the decrease of the audio level during
microphone 1 takeover (press + to further decrease the talkover audio output
level; press
– to lessen the talkover output audio decrease level)
E
Mic1 Talkover Trigger [dB]
– to determine the microphone 1 threshold level
that triggers the audio output-level decrease E
Mic1 Mix [dB]
– set to 1 to enable the Talkover mode or set to any other value
to decrease the Mic1 volume without changing the Line out and Mic2 volume
levels.
In the Mix mode, set the:
Line Mix [dB]
– to decrease of the line out volume level without changing the
Mic 1 and Mic 2 volume levels