Step 3: Install VP-732
Install
VP-732
using one of the following methods:
•
Remove the three screws from each side of the unit, reinsert those screws through
the rack ears and mount on a 19" rack.
•
Attach the rubber feet and place the unit on a flat surface.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
VP-732
. For best results, we recommend that you always
use Kramer high-performance cables to connect AV equipment to
VP-732
.
Connecting Balanced / Unbalance Stereo Audio Outputs:
Balanced
Unbalanced
Universal Connectors Pinout:
PIN #
VGA
COMP
s-Video
CV
1
R
Pr
2
G
Y
S_Y
Composite video
3
B
Pb
S_C
9
+5VD
12
EDID_SDA
13
H_Sync
14
V_Sync
15
EDID_SCL
Note:
PINs 5, 6, 7, 8 and 10 are GND.
Step 5: Connect the power
Connect the power cord to
VP-732
and plug it into the mains electricity.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Warning:
Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See
for updated safety information.
