Kramer VP-725DS, Руководство пользователя

Страница: 17 / 47

Understanding the Presentation Switcher / Scaler
13
(instead of the AV 1). You cannot choose VGA 1, VGA 2 or DVI
1
Choosing the VGA 1 PIP source when the AV 1 input is selected, will
insert the VGA graphic source over the composite video displayed on the
screen. You can choose a component
2
, VGA 2 or DVI PIP source
3
(instead of
the VGA 1). You cannot choose AV 2, YC 1, or YC 2
6.2.1 Activating the PIP Feature
To activate the PIP (which illuminates the PIP button), do one of the
following:
Press the PIP button
Switch on the PIP functionality via the OSD Menu
Press the PIP key on the remote control transmitter (see Figure 44)
When the Source Prompt is ON, the PIP is enclosed by an orange frame, and
the OSD PIP status appears superimposed over the top right corner of the
screen for a few seconds, as Figure 5 illustrates. After a few seconds
4
, the
orange frame and the OSD PIP status automatically disappear
5
.
Activating the PIP subsequently cycles between the PIP with the orange
frame and no PIP.
Figure 5: OSD PIP Status
When the Source Prompt is OFF, activating the PIP toggles between the PIP
(with no frame and no OSD PIP status) and no PIP.
1 As these are graphics sources and you cannot insert a graphics PIP over a graphics source
2 At graphic frequencies
3 As long as it is connected and switched on. Otherwise, choosing it will display a blank screen
4 By default, 20 seconds. But you can reset the timeout (from 3 to 60 seconds), see section 8.1.5.5
5 Trying to activate the PIP again while the PIP is still enclosed by an orange frame deactivates the PIP