VP-550X
Quick Start
P/N: 2 9 0 0 - 3 0 1 3 8 1 QS
Rev: 2
Scan for full manual
VP-550X Quick Start Guide
This guide helps you install and use your
VP-550X
for the first time.
www.kramerav.com/downloads/VP-550X
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
VP-550X
4K Presentation Switcher/Scaler
1 Set of rack ears
4 Rubber feet
Remote control transmitter with batteries
1 Power cord
1 Quick start guide
2 Cable straps
Step 2: Get to know your VP-550X
#
Feature
Function
1
IR Receiver
Receives signals from the remote-control transmitter.
2
IR LED
Lights when the unit accepts IR remote commands.
3
Input Selector
Buttons
USB-C
Press to select a USB-C source.
HDMI
Press to select the HDMI input (from HDMI 1 to HDMI 7).
VGA
Press to select the computer graphics input.
CV
Press to select the composite video input.
4
FREEZE Button
Press to freeze/unfreeze the output video image.
Not applicable when in video bypass mode.
5
MUTE Button
Press to toggle between muting (blocking out the sound) and enabling the audio output (both
line and speakers).
Muting the audio is not applicable when in audio bypass mode.
6
MENU Button
Press to enter/exit the on-screen display (OSD) menu.
7
Navigation
Buttons
Press to decrease numerical values or select from several definitions.
When not within the OSD menu mode, press to decrease the output volume.
Press to move up the menu list.
Press to increase numerical values or select from several definitions.
When not within the OSD menu mode, press to increase the output volume.
Press to move down the menu list.
Enter
Press to accept changes and change the SETUP parameters.
8
RESET TO XGA/1080p
Button
Press and hold for about 5 seconds to toggle resetting the video resolution to XGA or 1080p.
9
PANEL LOCK Button
Press and hold for about 5 seconds to lock/unlock the front panel buttons (panel locking
options are configurable).