KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-505 3G HD-SDI to Video Scan Converter
6
3. Connect the LEFT and RIGHT AUDIO OUT RCA connectors to the audio
acceptor (for example, a stereo audio amplifier).
4. Connect the VIDEO CV OUT BNC connector to the composite video
acceptor (for example, a composite video display).
5. Connect the VIDEO Y/C OUT 4-pin connector to a Y/C (s-Video) acceptor
(for example, an s-Video recorder).
6. Connect the power adapter to the 5V DC power socket and to the mains
electricity (not shown in the illustration).
6
Operating the VP-505 3G HD-SDI to Video Scan Converter
The
VP-505
is operated directly via the front panel buttons and via the OSD menu
(see
Section
6.2
6.1 Using the Front Panel Buttons
).
During normal operation (without the OSD), the front panel buttons perform in the
following manner:
•
MENU
: Displays the OSD Main Menu (see
Section 6.2
•
FREEZE
: Freezes the display. Press a second time to unfreeze the display
). Press a second
time to close the OSD
•
MENU
and
–
: Press together to set the output to NTSC
•
ENTER
and
FREEZE
: Press together to set the output to PAL
6.2 Using the OSD
The OSD is used to set a variety of parameters.
When using the OSD, the front panel buttons operate in the following manner:
•
MENU
: Opens the OSD main menu (see
Table 3
). Press a second time to
close the OSD
•
ENTER
: Selects the highlighted menu item or parameter
•
–
: Steps up through the menu list or decrements the parameter value
•
+
: Steps down through the menu list or increments the parameter value
Note:
After a period of 15 sec with no button activity, the OSD menu times-out
automatically.
Example of Using the OSD Menu
To set the green offset value of the display output (for example, to 42):
1. From normal operation, press MENU.
The OSD main menu appears on the screen.
2. Press the + or
–
button to highlight COLOR.
COLOR changes to green.
3. Press ENTER.
