Operating the VP-501xl/VP-502xl
9
You can set a test pattern to appear on the screen when there is no input
connected to the
VP-501xl
/
VP502xl
. To do so, enter the Advanced menu,
select No Input and set a test pattern number. This test pattern will appear
when there is no input connected. For example, set No Input to 1 if you want
test pattern 1 (as in Figure 5) to appear when there is no input connected to
the unit.
6.3.1.2 Save and Recall
The
VP-501xl
/
VP-502xl
lets you save and recall up to 4 setups (from 0 to 3).
The Save mode stores all the menu settings
1
in one of the Save setup numbers.
Saving Through the Advanced Menu
To save setup 1, for example:
1. Adjust the Picture Setup, the VGA Input Setup, the TV Output Setup, the
Zoom and panning, and the No Input number.
2. In the Advanced menu, select Save and set to number 1.
3. Press ENTER.
The setup is saved.
When disconnecting the unit, the setup that was saved last will be stored and will
reappear when connecting the unit once again.
Consider the following sequence, for example:
A certain setup is saved to 1
A different setup is saved to 2
Setup 1 is recalled
The unit is disconnected
The unit is reconnected
Setup 2 appears (since it was saved last)
1 The Save mode saves the Picture setup, the TV Output setup, the VGA Input Setup, the Zoom setup, and the advanced setup
(test patterns)
