Overview
3
3 Overview
The Kramer
VP-437
is a high quality presentation switcher and scaler. It
accepts one of seven inputs: a component video
1
on RCA connectors, computer
graphics on an HD15F connector, composite video on an RCA connector, s-
Video on a 4p connector and two HDMI signals. It scales the video, embeds the
audio, and outputs the signal to the HDMI output as well as to a computer
graphics output and an RGBHV video output together with a digital audio
output.
The
VP-437
Presentation Switcher / Scaler
:
Is HDTV compatible and the resolution can be up- or down-scaled
2
Has analog audio inputs and a digital (S/PDIF) audio output
Automatically detects and selects the audio source for the HDMI input.
Default selection is HDMI – if this is not present, then the machine uses
the audio from the analog input
Comes with an On-Screen Display (OSD) for easy setup and adjustment,
accessible via the IR remote control and via the front-panel buttons
Has a non-volatile memory that retains the last settings used
Supports firmware upgrade
3
via RS-232
Control your
VP-437
:
Directly, via the front panel push buttons
By RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
Remotely, from the infra-red remote control transmitter
Via the Ethernet
The
VP-437
is housed in a 19” 1U rack mountable enclosure, with rack “ears”
included, and is fed from a 100-240 VAC universal switching power supply.
1 Also known as Y, Pb, Pr, Y, Cb, Cr and YUV
2 The resolutions which can be selected include: 1080i, 1080p, 576i, 576p, 720p, 1080i, 1080p, WXGA, WSXGA, WUXGA,
NATIVE, VGA, SVGA, XGA, SXGA, UXGA, 480i, 480p
3 To check if firmware upgrades are available, go to our Web site at http://www.kramerelectronics.com
