Kramer VP-427X1, Руководство пользователя

Страница: 58 / 66

Kramer Electronics Ltd.
VP-427X1
– Protocol 3000
56
Function Description Syntax Parameters/Attributes Example
IMAGE-
PROP Set the image size.
Sets the image
properties of the
selected scaler.
COMMAND
#IMAGE-PROP

scaler_id <CR>
FEEDBACK
~nn@IMAGE-PROP

scaler_id , video_mode… <CR><LF>
scaler_id
– Scaler number – 1
video_mode – Status
0
– Over scan
1
– Full
2
– Best fit
3
– Pan scan
4
– Letter box
5
– Under 2
6
– Under 1
7
– Follow in
Set the image size to Full:
#IMAGE-PROP

1 , 1 <CR>
IMAGE-
PROP?
Get the image size.
Gets the image
properties of the
selected scaler.
COMMAND
#IMAGE-PROP?

scaler_id <CR>
FEEDBACK
~nn@IMAGE-PROP

scaler_id , video_mode… <CR><LF>
scaler_id
– Scaler number – 1
video_mode
– Status
0
– Over scan
1
– Full
2
– Best fit
3
– Pan scan
4
– Letter box
5
– Under 2
6
– Under 1
7
– Follow in
Get the image size:
#IMAGE-PROP?

1 <CR>
MODEL?
Get device model.
This command
identifies equipment
connected to
VP-427X1
and notifies of identity
changes to the
connected equipment.
The Matrix saves this
data in memory to
answer REMOTE-INFO
requests.
COMMAND
#MODEL?

<CR>
FEEDBACK
~nn@MODEL

model_name <CR><LF>
model_name
– String of up to 19
printable ASCII chars
Get the device model:
#MODEL?

<CR>
MUTE Set audio mute. COMMAND
#MUTE

out_index , mute_mode <CR>
FEEDBACK
~nn@MUTE

out_index , mute_mode <CR><LF>
out_index – 1
mute_mode
– On/Off
0
– Off
1
– On
Set output to mute:
#MUTE

1 , 1 <CR>
MUTE? Get audio mute. COMMAND
#MUTE?

out_index <CR>
FEEDBACK
~nn@MUTE

out_index , mute_mode <CR><LF>
out_index
– 1
mute_mode – On/Off
0
– Off
1
– On
Get mute status of output:
#MUTE

1? <CR>
NAME
Set machine (DNS)
name.
The machine name
is not the same as the
model name. The
machine name is used
to identify a specific
machine or a network in
use (with DNS feature
on).
COMMAND
#NAME  machine_name <CR>
FEEDBACK
~nn@NAME

machine_name <CR><LF>
machine_name
– String of up to 15
alpha-numeric chars (can include
hyphen, not at the beginning or end)
Set the DNS name of the
device to room-442:
#NAME

room-442 <CR>
NAME? Get machine (DNS)
name.
The machine name
is not the same as the
model name. The
machine name is used
to identify a specific
machine or a network in
use (with DNS feature
on).
COMMAND
#NAME?

<CR>
FEEDBACK
~nn@NAME

machine_name <CR><LF>
machine_name
– String of up to 15
alpha-numeric chars (can include
hyphen, not at the beginning or end)
Get the DNS name of the
device:
#NAME?

<CR>
NAME-RST Reset machine (DNS)
name to factory default.
Factory default of
machine (DNS) name is
“KRAMER_” + 4 last
digits of device serial
number.
COMMAND
#NAME-RST <CR>
FEEDBACK
~nn@NAME-RST

ok <CR><LF>
Reset the machine name
(S/N last digits are 0102):
#NAME-
RST

kramer_0102 <CR>