Kramer VP-426H2, Руководство пользователя

Страница: 17 / 22

14 VP-426H2 - Operating the VP-426H2
Main Menu Submenu Values Notes
Auto input
scan On/Off When set to on, automatically
scans the inputs and selects the
first live one found (default is OFF)
This feature is not active when the
OSD menu is open
Auto image On/Off When on, auto image is
implemented every time the input
is switched to VGA or when the
input resolution changes.
The auto-image feature calculates
the positioning based on the
picture connected to the VGA
input. Only a “full screen” picture
can be used for this auto-
positioning – a test pattern (or
some other picture) which has
black along the entire top, bottom
or one of the sides would not be
suitable)
Freeze Freeze Only / Mute /
Mute Only Select to freeze and/or mute the
display
EDID Manage HDMI EDID: set to OUTPUT,
Def 4K2K(6G), Def.4K2K(4:2:0),
Def. 4K2K(3G) or Def. 1080P
VGA EDID: set to Def. 1080P or
OUTPUT
For each input (VGA and HDMI),
select the default EDID.
If OUTPUT is selected, each time
you connect a different type of
output, you need to read the EDID
from that output once again.
Exit Select to exit to the Main Menu
Info Source Displays the source, input and
output resolutions and the
software version
Input
Output HDMI
Output PC
Version
Exit Select to exit to the Main Menu
Factory
Reset Reset Resets the device to its factory
default parameters and
automatically senses the input and
output devices
Exit Select to exit to the Main Menu
Exit Select to exit the OSD
5.3 Upgrading the Firmware
1. Save the new firmware file to a memory stick.
2. Disconnect power from the VP-426H2 .
3. Plug the memory stick into the USB connector on the VP-426H2 .
4. Press and hold the Menu button while reconnecting power to the VP-426H2 .