Kramer VP-210K, Руководство пользователя

Страница: 7 / 10

Connecting the VP-210K UXGA Line Amplifier
5
Table 1: VP-210K UXGA Line Amplifier Features
# Feature Function
1 LOOP 15-pin HD (F) Connector Connects to a local display
2 OUTPUT 15-pin HD (F) Connector Connects to the computer graphics acceptor
3 HI-Z/75 DIP-switches Set to 75 TERM (when a local monitor is not used); set to
Hi-Z (when a local monitor is connected to the LOOP 15-pin
HD connector)
4 5V DC +5V DC connector for powering the unit
5 EQ. Control knob Adjusts the video EQ. (equalization) compensation
6 LEVEL Control knob Adjusts the video signal level
7 INPUT 15-pin HD (F) Connector Connect to the computer graphics source
8 ON LED Illuminates when receiving power
5 Connecting the VP-210K UXGA Line Amplifier
To connect your VP-210K UXGA Line Amplifier , as shown in the example in
Figure 2 , do the following
1
:
1. Connect a computer graphics source (for example, a computer) to the
INPUT 15-pin HD (F) connector.
2. Connect the OUTPUT 15-pin HD (F) connector to an acceptor (for
example, a projector).
3. Connect the LOOP 15-pin HD (F) connector to an acceptor (for
example, a local display).
4. Connect the 5V DC power adapter to the 5V DC socket and connect the
transformer to the mains electricity (not illustrated in Figure 2 ).
5. Adjust the video output signal level and/or cable compensation equalization
level as needed.
6. Set the DIP-switches as follows:
If no terminal is attached to the LOOP connector, set the
switches down to 75 TERM
If a terminal is attached to the LOOP connector, set the
switches up to HI-Z
1 Switch OFF the power on each device before connecting it to your VP-210K. After powering up your VP-210K, switch on
the power on each device