KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VM-73
10
6.1
Reading EDID
The
VM-73
PC input directly reads the EDID from the PC OUT 1 output
(see
Section 6.1.1
), and allows the HDMI input to read the EDID of the
HDMI outputs (see
Section 6.1.2
).
6.1.1 Reading the EDID from PC OUT 1
The EDID information of the output connected to PC OUT 1 goes directly
to the PC input via pins 12 and 15 of the 15-pin HD connectors.
6.1.2 Reading the EDID from the HDMI outputs
The EDID is always acquired from the highest priority output (OUT 1 being
the highest and OUT 3 the lowest
1
You can acquire the EDID by disconnecting (for 2 seconds) and then
reconnecting the HDMI input.
).
To read the EDID (from OUT 2, for example), do the following:
1. Connect an acceptor to OUT 2 (OUT 3 can also be connected, but
OUT 1 cannot).
2. Turn ON the POWER.
3. Disconnect the input for 2 seconds and then reconnect it.
The input reads the OUT 2 EDID information
2
To acquire the default EDID, disconnect all the HDMI outputs, disconnect
the HDMI input for 2 seconds and then reconnect it.
.
1 For example, if all three outputs are connected, the EDID will be read from OUT 1. If OUT 2 and OUT 3 are connected, the
EDID will be read from OUT 2.
2 If you connect OUT 1, the EDID still remains that of OUT 2.