![background image](http://html1.mh-extra.com/html/kramer/vm-4hdmi/vm-4hdmi_user-manual_2000667010.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a VM-4HDMI 1:4 HDMI Distributor
8
5.1 Acquiring EDID
The
VM-4HDMI
initially operates with the default EDID. This means that
you can turn ON the power before connecting any of the acceptors or the
source.
5.1.1
Acquiring the EDID from a Selected Output
You can either work with the default EDID or select an EDID from one of the
connected outputs.
To select an EDID, do the following:
1. Press the SELECT button. The connected OUTPUTS LEDs blink.
2. Press the SELECT button again to cycle from one output to another until
reaching the desired output
1
.
Blinking will cease.
3. Press the READ button.
4. Turn OFF the power on the
VM-4HDMI
.
5. Turn ON the power.
The READ button blinks.
6. Press the READ button.
The blinking ceases and the button illuminates. The
VM-4HDMI
accesses the EDID of the selected output.
The EDID of the selected output is stored in the non-volatile memory
when the READ button no longer illuminates.
5.1.2
Restoring the Default EDID
To restore the default EDID, do the following:
1. Disconnect each output.
2. Turn OFF the power.
3. Turn ON the Power.
The READ button flashes.
4. Press the READ button.
The READ button illuminates.
The default EDID is stored in the non-volatile memory when the READ
button no longer illuminates.
1
After cycling once through all the outputs, the blinking will resume and you will have to start this procedure
again to
choose the desired output