KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
10
To select an EDID, do the following:
1. Press the SELECT button. The connected OUTPUT LEDs blink.
2. Press the SELECT button again to cycle from one output to another until
reaching the desired output
1
3. Press the READ button.
The blinking ceases and the button illuminates. The
VM-4HDCP
accesses the
EDID of the selected output.
The EDID of the selected output is stored in the non-volatile memory when the
READ button no longer illuminates.
.
4. Turn OFF the power on the
VM-4HDCP
.
5. Turn ON the power.
6.1.2 Restoring the Default EDID
To restore the default EDID, do the following:
1. Disconnect each output.
2. Turn OFF the power.
3. Turn ON the power.
The READ button flashes.
4. Press the READ button.
The READ button illuminates. The default EDID is stored in the non-volatile
memory when the READ button no longer illuminates.
7
Technical Specifications
Table 3
includes the technical specifications:
Table 3: Technical Specifications
2
INPUT:
of the VM-4HDCP 1:4 DVI Distributor
1 DVI, 1.2Vpp on a DVI Molex 24pin female connector; DDC signal 5Vpp (TTL)
OUTPUTS:
4 DVI, 1.2Vpp on DVI Molex 24pin female connectors; DDC signal 5Vpp (TTL)
BANDWIDTH:
1.65GHz
CONTROLS:
SELECT and READ buttons for selecting and storing EDID information
POWER SOURCE:
100-264 VAC, 50/60Hz 11VA
DIMENSIONS:
19-inch (W), 7-inch (D), 1U (H)
WEIGHT:
2.5 kg. (5.5 lbs.) approx.
ACCESSORIES:
Power cord, rack "ears"
OPTIONS:
Kramer DVI cables
3
1 After cycling once through all the outputs, the blinking will resume and you will have to start this procedure again to choose
the desired output
2 Specifications are subject to change without notice
3 The complete list of Kramer cables is on our Web site at
http://www.kramerelectronics.com
