Kramer VM-4H2, Руководство пользователя

Страница: 8 / 20

VM-4H2 - Overview 5
3.1 Defining the VM-4H2 4K HDMI 2.0 1:4 DA
This section defines the VM-4H2 .
Figure 1: VM-4H2 4K HDMI 2.0 1:4 DA
# Feature Function
1 IN LED Lights green when an HDMI source is connected
2 OUT LEDs (1-4) Light green when an HDMI acceptor is connected
3 ON LED Lights green when the unit is powered on
4 HDMI IN Connector Connects to an HDMI source
5 HDMI OUT Connectors (1 to 4) Connect to up to four HDMI acceptors
6 RS-232 (PROG) Terminal Block Connects to a PC for firmware updating
7 SETUP DIP-Switches (1-4) Used for setting four different operation modes (see Section 3.2 )
8 5V DC Power Connector Connects to a 5V DC power supply
3.2 Setting the DIP-Switches
The VM-4H2 uses four DIP-switches to set four different operation modes:
•
Programming mode – normal operation mode, programming mode
•
MAC mode – enable HDCP, disable input HDCP
•
Force RGB - force RGB, normal operation mode
•
Lock default EDID – locked, not locked
Note : Any time the DIP-switch settings are changed, the device must be powered
off and on for the new settings to take effect.