Kramer VM-2DT, Руководство пользователя

Страница: 6 / 27

Kramer Electronics Ltd.
VM-2DT - Defining the VM-2DT 1:2 HDBT Distributor 4
Defining the VM-2DT 1:2 HDBT
Distributor
This section defines the VM-2DT .
[
Figure 1: VM-2DT 1:2 HDBT Distributor Front Panel
# Feature Function
PROGRAM Mini USB Connector Use to send serial commands, see Protocol 3000 on page 15 .
Connect to a PC to perform firmware upgrades (via K-Upload) and
work with the EDID Designer.
K-Upload and EDID Designer can be downloaded from our Web site
at:
www.kramerav.com/support/product_downloads.asp .
EDID SETUP Button Press to capture the input EDID or select the default EDID, see
Acquiring an EDID on page 9 .
ACTIVE INPUT LED Lights when an active input signal is detected.
HDBT LINK LEDs IN Lights when a link is established with the transmitter.
OUT Lights when a link is established with the receiver
(from 1 to 2).
OUTPUTS CONNECTED LEDs Lights when an active output acceptor is detected
(from 1 to 2).
ON LED Lights when the unit receives power.
INPUT HDBT Connector
Connects to the HDBT source, for example TP-580T .
HDBT OUT Connectors Connect to an HDBT acceptor (from 1 to 2), for example TP-580R .
SETUP 8-way DIP-switches Used to set the IR and RS-232 commands behavior, see Setting the
DIP-Switches for Routing on page 6 .
SETUP 4-way DIP-switch For future use.
5V DC Connector Connects to the 5V DC power supply.