Kramer VM-24HDCP, Руководство пользователя

Страница: 13 / 19

Connecting the VM-24HDCP
11
11
To cycle between the different modes (One Output, Default and Auto-mix),
as defined in
Table 2 , press the EDID SELECT button
Table 2: The EDID Modes
Current
EDID Mode
Appearance To cycle to the
Default EDID
To cycle to the
Auto-mix EDID To cycle to the
One output EDID
One Output The selected output
LED flashes
Press the EDID
SELECT button
once again after
selecting output 4.
The output LEDS
flash
Default The output LEDs
flash simultaneously
Press the EDID
SELECT button
once
Auto-mix The output LEDs
flash in sequence
Press the EDID
SELECT button to
select the required
output the selected
output flashes
To acquire or change the EDID of a new output display from:
•
One output, see Section 6.3.1
•
The default EDID, see Section 6.3.2
•
Several connected outputs, see Section 6.3.3
6.3.1 Acquiring / Changing the EDID from One Output
To acquire or change the EDID of a new output display:
1. Connect the power supply.
2. Connect the new output display device.
3. Press the EDID SELECT button, enter the One output mode as defined in
Table 2 , and set to the connected output.
The appropriate OUTPUT STATUS LED flashes, indicating that that
output channel is selected.
4. Press the EDID READ button to copy the EDID of the selected OUTPUT
to the inputs
1
.
While the EDID is being copied, the EDID SELECT and READ buttons
illuminate.
The new EDID is copied when both buttons no longer illuminate.
1 If you want to cancel the EDID modification, wait for a few seconds without touching any button