Kramer VM-114H, Руководство пользователя

Страница: 11 / 18

Using the VM-114H 2 Input 1:4 HDMI DA
9
To acquire the EDID :
1. Connect the output(s) from which you want to acquire the EDID.
2. Press the EDID SELECT button briefly.
The device enters the EDID programming mode. The last acquired EDID is
indicated by the lit LED (for example, if Output LED 2 is lit, the EDID
acquired was from Output 2).
3. Press the EDID SELECT button repeatedly until the required EDID is
indicated based on the patterns described above.
4. Press the EDID READ button.
The relevant LEDs flash in a pattern for a few seconds as follows:

Slowly and then no longer lights. The EDID was successfully read.

Quickly and then no longer lights. The EDID was not read and the default
EDID was stored.
5.3.1 Disabling/Enabling Deep Color Support
You can disable EDID deep color support to prevent signal deterioration when
using long twisted pair cables on INPUT 2.
To disable deep color and acquire EDID :
1. Disconnect the power.
2. Connect the output or outputs from which you want to acquire the EDID.
3. Connect the power while pressing the EDID READ button.
4. Perform steps 3 through 5 in
Section 5.3 .
To enable deep color and acquire EDID :
1. Disconnect the power.
2. Connect the output or outputs from which you want to acquire the EDID.
3. Connect the power while pressing the EDID SELECT button.
4. Perform steps 3 through 5 in
Section 5.3 .
1 The EDID acquired is a weighted average of all the connected outputs For example, if several displays with different resolutions are
connected to the outputs, the acquired EDID supports all the resolutions, as well as other parameters included in the EDID