8
VA-2H - Operating the VA-2H
5
Operating the VA-2H
You can operate the
VA-2H
in two ways, from the:
•
Front panel (see
Section 5.1
•
EDID Designer (see
)
Section 5.2
5.1
Operating from the Front Panel
)
You can operate the
VA-2H
from the front panel as follows:
1. Press and hold the SELECT button, for 3 seconds, to cycle through the
EDID options:
2. Press the SELECT button to select the desired EDID option:
When MONITOR is selected, the MONITOR LED illuminates and the
EDID from the display is routed to the input port
When DEFAULT is selected, the DEFAULT LED illuminates and the
default EDID is routed to the input port
When USER is selected, the USER LED illuminates and the user EDID
is routed to the input port. The user EDID can be created and modified
using the EDID Designer (see
Section 5.2
5.2
Operating from the EDID Designer
)
The EDID designer application software can be used to manipulate the EDID data.
To operate the
VA-2H
from the EDID Designer, navigate to
Command > Set
Device Mode
and choose the mode:
OUTPUT
,
DEFAULT
or
USER
.
For a full description of how to setup and use the EDID Designer, see
Section 6
MONITOR
USER
DEFAULT
.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203