Kramer VA-1USB-R, Руководство пользователя

Страница: 12 / 26

VA-1USB-T/VA-1USB-R - Connecting the VA-1USB-T and VA-1USB-R 9
9
To connect the VA-1USB-T and the VA-1USB-R as illustrated in the example
in Figure 5 :
1. On the VA-1USB-T , connect:

The USB host, (for example, a computer) to the USB Host Input
connector

The RS-232 controller, (for example, a laptop controller with an
RS-232 interface) to the RS-232 9-pin D-sub connector

An IR blaster to the IR 3.5mm mini jack
2. On the VA-1USB-R , connect:

The first USB Devices port to a USB hard drive

The second USB Devices port to a multimedia player

The fourth USB Devices port to a USB flash storage device
3. Using STP cabling, connect the CAT 5/6 Out RJ-45 connector on the
VA-1USB-T to the CAT 5/6 In RJ-45 connector on the VA-1USB-R (see
Section
2.4
).
4. Set the machine ID on both devices to the same ID using the Machine ID
DIP-switch (see Section
5.2
).
5. Connect the power adapters to the power sockets on the VA-1USB-T and
VA-1USB-R , and plug the adapters into the mains electricity (not shown in
Figure 5 ).
6. Establish a TP link by pressing the Link button on the receiver.