10
TR-93 / TR-94 - Installing the TR-93 and TR-94
6.2
Connecting the TR-94
To connect the
TR-94
, as illustrated in the example in
Figure 4
, do the following:
1. Connect an audio amplifier (for example, the Kramer
914
Power/Amplifier
Mixer) to the
TR-94
input channels by connecting the:
Left + and
– SPEAKER OUT terminal block connectors on the
914
to
the CHANNEL 1
INPUT 8Ω and COM terminal block connectors,
respectively, on the
TR-94
Right + and - SPEAKER OUT terminal block connectors on the
914
to
the CHANNEL 2
INPUT 8Ω and COM terminal block connectors,
respectively, on the
TR-94
Alternatively, you can reverse the order and connect the left output on the
914
to
CHANNEL 2 and the right output on the
914
to CHANNEL 1.
On the
914
, set the STEREO/BRIDGED MONO
switch to STEREO
2. Connect the outputs to a 70V/100V speaker (for example, the Kramer
Yarden 6-C
Ceiling Speaker) by connecting CHANNEL 1 to the Left speaker
and
CHANNEL 2 to the Right speaker. For each channel connect the COM
terminal block connector to the ground speaker connector and the 70V or
100V OUTPUT terminal block connector to the + speaker.
Note that you have to select the same power settings (70V or 100V),
as required, for both channels.
3. Connect the audio amplifier (the Kramer
914
in this example) by connecting:
It to an audio source (not shown in
Figure 3
)
The supplied power cord to the
914
power socket and to the mains
electricity (not shown in
Figure 3
)
For further details, you can download the
914
and
Yarden 6-C
user manuals from our
Web site
i