Kramer TP-752R, Руководство пользователя

Страница: 7 / 14

Kramer Electronics Ltd.
TP-752T / TP-752R – Defining the 2-Wire Extra Range HD Transmitter 5
Figure 2: TP-752R 2-Wire Extra Range HD Receiver
# Feature Function
RESET Recessed Button
Press to reset the device.
BAUD RATE DIP-switches
Set the baud rate (baud rate on TP-752T and TP-752R should
be identical), see Setting the Baud Rate on page 9 .
ON LED
Lights green when the device is powered.
Ring Tongue Terminal Grounding
Screw
Connect to grounding wire (optional), see Grounding the TP-
752T/TP-752R on page 8 .
FROM TP-752T
(Connect via
one of these
options)
CAT 5/6 RJ-45 Port Connect to the RJ-45 port on TP-752T .
HD15 15-pin HD
Connector
Connect to the 15-pin HD connector on
TP-752T
.
A, B 2-pin
TERMINAL BLOCK
Connector
Connect to the 2-pin terminal block connectors on TP-752T .
For 2-wire cabling where the 2 wires have similar
characteristics (e.g. twin-flex cable), wire by
connecting to the 2 terminals of the terminal block
connector.
When using co-ax cable, it is best to wire with the
inner cable connected to the A terminal, and the shield
connected to the ground tab (the ring tongue terminal
grounding screw).
OUTPUTS
HDMI Connector Connect to an HDMI acceptor.
S/PDIF RCA
Connector
Connect to a digital audio acceptor.
BAL. AUDIO 5-pin
Terminal Block
Connector
Connect to a stereo balanced audio acceptor.
RS-232 9-pin D-sub Connector
Bi-directional RS-232 between the devices, allowing control of
the display from the source end/control of a source from the
display end.
5V DC
+5V DC connector for powering the unit.