8
TP-580Txr/TP-580Rxr - Connecting the TP-580Txr / TP-580Rxr Transmitter / Receiver
6
Connecting the TP-580Txr / TP-580Rxr
Transmitter / Receiver
Always switch off the power to each device before connecting it to your
Transmitter and Receiver. After connecting your Transmitter and
Receiver, connect their power and then switch on the power to each
device.
You can use the
TP-580Txr
HDMI Line Transmitter
and the
TP-580Rxr
HDMI Line
Receiver
to configure an HDMI transmitter/receiver system, as shown in the
example in
Figure 3
.
To connect the
TP-580Txr
, connect the:
1. HDMI source (for example, a DVD player) to the HDMI IN connector.
2. RS-232 9-pin D-sub connector to a computer (for example, a laptop to
control the projector).
3. External IR transmitter from the 3.5mm mini jack to an IR Receiver on the
DVD player, for example.
4.
HDBT OUT
RJ-45 connector over twisted pair to the
TP-580Rxr
HDBT IN
connector.
Alternatively, you can use any other certified HDBaseT receiver device (for example, the
Kramer
WP-580Rxr
)
5. 12V DC power adapter to the power socket and connect the adapter to the
mains electricity (not shown in
Figure 3
).
To connect the
TP-580Rxr
, connect the:
6. HDMI OUT connector to the HDMI acceptor (for example, a projector).
7. RS-232 9-pin D-sub connector to an RS-232 port (for example, a projector that is
controlled by the laptop that is connected to
TP-580Txr
).
8. IR 3.5mm mini jack to an IR sensor.
9.
HDBT IN
RJ-45 connector over twisted pair to the
TP-580Txr
HDBT OUT
connector.
Alternatively, you can use any other certified HDBaseT transmitter device (for example,
the Kramer
WP-580Txr
)
10. 12V DC power adapter to the power socket and connect the adapter to the
mains electricity (not shown in
Figure 3
).
!
