KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-300NK 1:3 High Resolution XGA DA
8
5 Connecting the VP-300NK 1:3 High Resolution XGA DA
To connect your
VP-300NK
1:3 High Resolution XGA DA
1
, as the example in
Figure 11 illustrates, do the following
2
:
1. Connect a computer graphics source to the INPUT HD15F connector.
2. Connect the OUTPUT HD15F connectors to up to three
3
acceptors, as
follows:
Connect the OUTPUT 1 connector to acceptor 1 (for example, a
projector)
Connect the OUTPUT 2 connector to acceptor 2 (for example, an
LCD monitor)
Connect the OUTPUT 3 connector to acceptor 3 (for example, a
display)
3. Connect the 12V DC power adapter (wall transformer) to the 12V DC socket
and connect the transformer to the mains electricity.
4. If required, set the:
Hs and Vs switches
ID Bit switch to ON
1 From this section on, all the information is relevant to the VP-200NK, VP-300NK and VP-400NK, unless noted otherwise
2 Switch OFF the power on each device before connecting it to your VP-300NK. After powering up your VP-300NK, switch
on the power on each device
3 Two for the VP-200NK and four for the VP-400NK
