KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing the TBUS-9 Table Connection Bus
8
5.4
Connecting the Cables
To connect the cables:
1. Insert the power cable into its appropriate connector from below
(see Figure 6).
2. Insert the other cables through the split grommets, removing the split
brackets if necessary to route the cables.
3. Secure the cables to the tie holes using the included self-locking ties.
Do not secure the cables too tightly or too loosely. Leave a small amount of
slack.
After the unit is connected to mains power and the proper cables, it is ready for
use.
Figure 6: Connecting the Cables