SPK-W612 - Installing the SPK-W612
5
4. Unscrew the negative (black) screw-type connector, insert the wire from the
negative terminal on the receiver, and retighten.
5. Unscrew the positive (red) screw-type connector, insert the wire from the
positive terminal on the receiver, and retighten.
6. Insert the brackets (see
Section 4.3
)
4.3
Installing the Mounting Bracket
To install the mounting brackets, as illustrated in
Figure 2
, do the following:
1. Insert the ballmount into the fixture (see
Figure 2A
).
2. Insert the ABS screw mount into the fixture over the ball mount (see
Figure
2B
).
3. Using the bracket, or any metal piece, tighten the ABS screw.
4. Screw the fixture into the two threaded holes on the speaker (see
Figure
2C
).
5. Place the metal bracket on the two fixtures, insert the four bracket screws
and tighten (see
Figure 2D
).
Figure 2: Installing the Fixed Bracket
A
C
B
D
