Kramer SPK-W611, Руководство пользователя

Страница: 8 / 15

6 SPK-W611 - Installing the SPK-W611
4. Strip the ends of the wires approximately 1/2 inch.
5. Pass the wires from the location of the amplifier to the speaker location.
If the speaker wires are run inside the wall, pass the wires from the
amplifier into the wall and out the hole in the wall where the speaker
is to be installed.
6. Pass the speaker wires through the round hole in the mounting bracket (see
Figure 2 ).
Figure 2: Installing the Speaker Wires
7. Connect the left side speaker to the left side channel of the amplifier and the
right side speaker to the right side channel of the amplifier:
ƒ
Unscrew the negative (black) screw-type connector on the rear panel
of the speaker, insert the wire from the negative terminal on the
amplifier, and retighten.
Take care not to insert the insulated part of the wire into the screw-type
connector
ƒ
Unscrew the positive (red) screw-type connector on the rear panel of
the speaker, insert the wire from the positive terminal on the amplifier,
and retighten.
Take care not to insert the insulated part of the wire into the screw-type
connector
i